Bikes

The Sunday Darkwave frame is built out of 100% 4310 chromoly and features Sunday's signature dent-resistant wave down tube to give riders a little extra peace of mind when things don't go according to plan. It stays looking clean with refined details like an integrated seat clamp, tapered stays, and integrated chain tensioners. Removable brake hardware and gyro tabs are also available when you need them and disappear when you don't. - 100% 4130 chromoly frame - Broc Raiford signature geometry - Removable U-brake hardware and Gyro tabs - Integrated seat clamp - Wave Down Tube: Down tube dents are common with the competitor's frames and they significantly weaken the front end of your bike. The double-butted, 1.45" diameter down-tube feature Sunday's proven Wave shaping to fight denting against contact made from a rail, ledge, coping and whatever else happens to get thrown at it. - Miter Cut Top Tube: A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a “sandwiched” top tube at this critical junction. - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings. - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal.

BSD Freedom is Kriss Kyle's signature frame, designed to perform well on all terrain. This frame combines the stability of a low 11.5" BB, the responsiveness of a 75 degree head angle and the versatility of a short rear end. To create a stiffer rear triangle we've utilized an invest cast wishbone and invest cast seatstay bridge. - Constructed from Japanese Sanko seamless 4130 chromoly tubing, triple butted - Removable brake mounts, brake kit sold separately - Head tube and bottom bracket heat treated and CNC machined 4130 - Heat treated and investment cast 4130: chainstay wishbone, dropouts, and seatclamp - Frame weight: 5 lbs

Simply for shredding. All-new for 2021, the Minotaur is a dirt/pump track beast with a full 6061-T6 alloy frame for performance, as well as our own rigid chromoly fork for simplicity, speed, and style. By using a rigid fork, we were able to not only offer an easily upgradable bike with a pro-spec alloy frame for a much lower price but also create a bike that simply didn't exist yet. The Minotaur is a bike that's as fun to ride as it looks. With camo Radio Helix tires and a rigid fork, this is one lively bike design for nothing but fun!

The Grime frame is the signature frame of Denim Cox. Whether he's riding motocross, Barbie bikes or BMX, you know Denim tears it up on all terrain. Designed to Denim’s specification, with a steep 75.5 headangle, a 12.8 - 13.2” rear end length with an invest cast chainstay yoke for extra tire clearance and a 9” standover.

With the ability to carry serious loads, triple mounts on the forks and three separate bottle cage fixings allow you to carry as much as you need with you. The Hook EXT C comes complete with a carbon frame and V2 carbon fork with triple cage mounts for speedier off-road raids. Sram provides the bike's 10 – 42T XD cassette for a great range of gears, so you can keep the pace high over whichever surface you decide to tear across. Our friends at Hunt handle the hoops, providing the bike with a tubeless-ready Adventure Sport 27.5" wheelset. Finished with head-turning tan-wall WTB Venture tires, onlookers will have to be quick if they want to catch a glimpse as you fly through the undergrowth. It comes in this year's glossy metallic black colorway, too.

Are you heading down the path least travelled? For a drop handlebar bike, the Hook EXT seldom faces terrain it cannot handle. A Columbus steel frame, a dedicated carbon fork and a sturdy 27.5’’ wheelset equip the EXT with an armoury to ride where other bikes would surely suffer. A Sram 1x11 Rival groupset suitably gives this machine the gears and brakes to match. As capable on backcountry campouts as it is on post-work blasts, the Hook EXT remains the choice when you’re unsure of the terrain, but know you want to have fun riding it.

Made to cross countries and continents via all kinds of roads and trackways... The Beyond 1 serves as the perfect first bike for fledgling adventurists. With tires as wide as a mountain bike accompanied by a 28 / 40T chainset, this bike will be able to reach wherever you’ve plotted on the map. Leverage-boosting bars provide added control, and an eye-watering selection of mounting points mean you won’t need to leave anything at home. Its simplicity makes it easy to service, too.

We've upgraded the frame on the Dice 20" with a full alloy 6061-T6 frame, making it one of the very first full alloy freestyle bikes ever made. Everything on this bike was picked to ensure that this bike has the right equipment to make those first steps in BMX as enjoyable as possible. The Dice has specific geometry making it perfectly suited for the younger rider. The frame uses a shorter 20" toptube paired with a shorter 13.2" chainstay. Featuring 25-9 gearing and tapered forks, the Dice is one entry-level machine that packs a serious punch for a lightweight contender.

The Asura Pro uses our full Chromoly aftermarket dirt jump frame as a base and then injects a pro level parts upgrade in the form of a Manitou Circus Comp fork, Tektro hydraulic disc brake, and fully sealed Radio Pro DJ wheels. Perfect for blasting the trails, sessioning the skatepark, or even street missions, the Asura Pro is a bike that might just surprise you with how versatile it is.

The Audax, with its slender steel frame, light carbon fork, and many mounts for luggage, will let you take long-distance riding to the limit. As the kilometers roll by, hydraulic disc brakes provide reliable stopping power while a sub-compact chainset handles propulsion. A combination of WTB Horizon and Byway tires are fast-rolling over gravel, mud, or dirt. The integrated rear light mount brings discipline into the modern age. Topped off with Ritchey finishing kit, you’ll reach the coast before this bike gives up. Fast on tarmac, and smooth over broken ground, its broad tires contain enough air to carry you and your kit comfortably above a range of surfaces.

An elegant piece of craftsmanship, the Valac is built with a longer 20.75" top tube, 76-degree headtube angle, and a taller 9" bar, making it the perfect ride for the rider who's progressing to a bigger and better bike. With geometry taken from our aftermarket range and a set of wider Saltplus Burn tires, the Valac rides just like the bikes that the pro teams use. With fully sealed bearings throughout and a Salt Zion mid-load stem, the Valac is an eye-catching and dialed bike, built to shred it all.

The Gestalt is for the drop bar rider that doesn’t want to stick to pavement, and can’t help but get dirty no matter the route. Long-distance commuters and all-weather riders will appreciate the fender and rack mounts and the sure-stopping disc brakes, and the larger volume tires are right at home on that unexpected detour. Series 2 or 3 Frame The Gestalt features a butted and formed Series 2 6061 aluminum frame with internal routing, disc brakes, and rack and fender eyelets. Series 3 frames add thru-axles and a tapered headtube. Beyond Road Geometry Beyond Road Geometry offers a blend of endurance road handling with enhanced stability for off pavement use. Disc Brakes Disc brakes provide smooth, controlled stopping in all conditions with minimal maintenance. Tire Clearance The Gestalt frame and fork have clearance for up to 700c x 35 tires. - Aluminum frame - Full carbon fork - Shimano Sora 2x9 drivetrain - Tektro MD-C500 Dual Piston mechanical disc brakes - WTB Exposure Comp 700c x 32 tires

The ideal choice for casual rides around the neighborhood, bike path, or wherever your adventure awaits. Our unique Foot Forward pedal placement and easy upright riding position ensure total comfort and stability while on the bike. The Foot Forward position allows you to maintain proper saddle height while still having the ability to place your feet on the ground when seated. The Drifter 7 offers a straightforward 1 x 7 drivetrain that is durable and provides a wide enough gearing for most terrain. - Lightweight 6061 alloy frame with foot-forward riding position - Alloy crankset with sealed cartridge bottom bracket - Alloy rims with stainless steel spokes - 26 x 2.25-inch multi-condition tires - Alloy upright city handlebar and stem - Sun custom cruiser saddle and ergo grips - Steel chain guard - Alloy kickstand

The ideal choice for casual rides around the neighborhood, bike path, or wherever your adventure awaits. Our unique Foot Forward pedal placement and easy upright riding position ensure total comfort and stability while on the bike. The Foot Forward position allows you to maintain proper saddle height while still having the ability to place your feet on the ground when seated. The Drifter 7 offers a straightforward 1 x 7 drivetrain that is durable and provides a wide enough gearing for most terrain. - Lightweight 6061 alloy frame with foot-forward riding position - Alloy crankset with sealed cartridge bottom bracket - Alloy rims with stainless steel spokes - 26 x 2.25-inch multi-condition tires - Alloy upright city handlebar and stem - Sun custom cruiser saddle and ergo grips - Steel chain guard - Alloy kickstand

One of the most anticipated bikes in BMX, the CRS is back for 2021 with even more bang for your buck. Now featuring a sealed front hub, this all-terrain slayer rolls smoother than ever. Packed full of aftermarket parts from ECLAT, including the Bios Pivotal seat and Pure seat clamp, the CRS looks and rides like a bike twice the price tag. The geometry has been tailored to allow for greater progression of the younger generation. The super-short 12.75" chainstays, 165mm cranks, and shorter 26mm fork give the CRS a snappy and agile ride that is perfect for learning and advancing. A bike truly built with vision, the CRS is unlike anything else.

Flavor-enhanced, offering a longer top tube and slacker angles If we have to use the category buzzwords the industry keeps inventing, the Juice is a "downcountry" or "trail" bike. We describe it as a fun bike that is very comfortable on a single track, flowy trails, and general backwood exploring. Its medium-length wheelbase also makes it a stable platform for bike-packing. The latest version features tough IRD Broski Sliding Dropouts that allow you to go single-speed or geared or even run hub gears and alter ride characteristics slightly by adjusting the chainstay length. Fits up to 27.5 x 2.8" wide tires without needing to invest in Boost parts. Hasn't abandoned front derailleur compatibility. Another unusual option: the Juice is available in a belt-drive-ready version. - Tange Prestige heat-treated butted CrMo steel; butted CrMo rear end - Geometry is optimized for 100mm travel 29" forks and will handle 120mm forks great, too - Standard or Belt-Drive compatible versions available (split for installing belt is on the seat stay.) - IRD Broski Sliding Dropouts allow geared and single-speed builds with easy wheel removal – These currently come ready for 142 x 12mm Thru-Axle hubs. (Can be converted to 135mm spacing for traditional QR hubs with IRD aftermarket inserts) - Rear rack and fender eyelets - CNC-machined 44mm headtube: Will take 1-1/8" steerers with a ZeroStack 44 headset or tapered steerers with a ZS44 upper assembly and external cup (EC44) lower assembly - 31.6mm post size/34.9mm frt. der. size/34.9mm seat collar/73mm bottom bracket (English threads); 400mm+ post recommended - Internal cable routing on the seat tube for a dropper post - ISO disc brake tabs - Cable routing for top pull front derailleur - Recommended tire size: 29" x 2.4" (or 27.5 x 2.8”) - Color: Battleship Gray - 5.19lbs (15.5")

A cross-inspired bike built to conquer the city streets, the Super Professional features the 2-For-1 Dropout, All-City's elegantly designed combination geared or single-speed sliding dropout system. Fast, responsive, agile, and capable on mixed terrain, the Super Professional can be converted from single-speed to geared or back again to crush all your daily deeds and commutes. - 612 Select Tubing - Features All-City's 2-For-1 Dropout, a beautifully crafted sliding dropout system - Signature fork crown with four-point rack mounts - Two bottle cage mounts, plus mounts in front and rear for racks and fenders - 12mm thru-axles, flat-mount brakes

A Cross Monster Built for Exploration Taking inspiration from our famed cross bikes, the Gorilla Monsoon will send you far into the unknown with comfort, style, and elegance. Do-It-All Dirt Solution A sweet beast designed to handle double track, gravel, bikecamping, and the pursuit of good times, this nimble, do-it-all dirt solution is ready to send cross racers, dirt tourists, and backcountry explorers on the ride of a lifetime. Mounts for Fenders and Racks in Front and Back Conquer wet roads, fully loaded bikepacking trips, and the gnarliest of grocery lists Tire Clearance Built around a 27.5 x 2.4" platform, the Gorilla Monsoon offers clearance for 700c x 42mm tires to deliver complete tire freedom 612 Select Tubing Selected specifically for sporty handling on the course, comfort on tours, and maximum fun on-road or off Dropper Seatpost Ready to rock steep descents on the trail or pavement Flat-mount brakes Flat-mount disc brakes offer clean aesthetics and compatibility with modern product standards

A sweet beast designed for chasing good times, the Gorilla Monsoon builds on All-City’s proven cross geometry to handle camping, dirt touring, and exploring the unknown. Built around 27.5 x 2.4" tires and offered in seven frame sizes, it comfortably accommodates our smallest and tallest riders for long days in the saddle. Features like stealth dropper post routing and full touring mounts round out this elegantly styled steed. - 612 Select Tubing – Selected specifically for sporty handling on the course, comfort on tours, and maximum fun - Geometry – adapted from All-City CX geo, plus the ability to support some load - 73mm bottom bracket allows for a wider chainring option and ample tire clearance - Stealth dropper routing - Tire clearance – 27.5 x 2.4" or 700c x 42mm - Bi-plane fork crown features four-point rack mount and mounts for fender - Flat-mount brakes, front and rear thru-axles, 1-1/8" head tube, All-City Shot Collar, three water bottle mounts - Seven frame sizes: 43, 46, 49, 52, 55, 58, and 61cm

Our most popular and versatile model, the Space Horse has become a bit of a cult favorite through its classic styling and ability to handle just about any task or terrain. Ambitious road centuries, gravel racing, loaded touring, looking great while commuting — the Space Horse is equipped for it all. - 612 Select Tubing – a proprietary blend of 4130 double-butted Chromoly tubes, every piece of tubing on every frame size has been carefully chosen to provide the best ride possible - Geometry — Mix between road and randonneuring with a relatively short rear end and a slightly lower bottom bracket than a standard road bike - 12mm front and rear thru-axles, flat-mount disc brakes - Front and rear rack mounts, fender mounts, and pump peg - Fork features ports for internal Dynamo cable routing - Tire Clearance — 43–61cm frames fit 650b x 47mm (650b x 42mm w/fenders); additionally, 49–61cm frames fit 700c x 45mm (700c x 42mm w/fenders) - Signature custom-cast dropout with replaceable derailleur hanger, signature lugged fork crown and custom fork ends, integrated seat collar, pantographed bottom bracket shell, reinforced bottle bosses for three bottle cages

The Zig Zag is All-City's answer to what a Modern Endurance Steel Road Bike should be. Elegant and eye-catching, it's a ripping-fast and efficient machine built to shield the rider from road chatter and unnecessary fatigue. Designed for speed, style, and maximum comfort, the Zig Zag allows riders to go further, faster, and have more fun. - A.C.E. Tubing — Our proprietary heat-treated, air-hardened, extruded steel tubing that we custom designed for riding and racing - Whisky No.9 RD+ carbon fork - Whisky No.7 handlebar, stem and seatpost - A classic road silhouette blends with a contemporary road geo to balance power with comfort for long days in the saddle or attacks off the front - Clearance for 700c x 35mm tires without fenders; 700c x 32mm with fenders - Custom head badge, Signature dropouts, Signature brazed-on seat collar, pump peg, two bottle bosses, and hidden fender mounts

The Zig Zag is All-City’s answer to what a Modern Endurance Steel Road Bike should be. Elegant and eye-catching, it’s a ripping-fast and efficient machine built to shield the rider from road chatter and unnecessary fatigue. Designed for speed, style, and maximum comfort, the Zig Zag allows riders to go further, faster, and have more fun. - A.C.E. Tubing — Our proprietary heat-treated, air-hardened, extruded steel tubing that we custom-designed for riding and racing - Whisky No.9 RD+ carbon fork - Whisky No.7 handlebar, stem and seatpost - A classic road silhouette blends with a contemporary road geo to balance power with comfort for long days in the saddle or attacks off the front - Clearance for 700c x 35mm tires without fenders; 700c x 32mm with fenders - Custom head badge, Signature dropouts, Signature brazed-on seat collar, pump peg, two bottle bosses, and hidden fender mounts

The EZ-Sport CX is a step up from the EZ-1—more responsive and more efficient. A big 26" rear wheel and 20" front wheel combined with the 24-speed gearing make the miles go by quickly and easily. Ideal for touring, commuting, and long recreational rides, the EZ-Sport CX offers remarkable handling at any speed. - Fits riders with an X-Seam of 36 – 45"

A Cross Monster Built for Exploration Taking inspiration from our famed cross bikes, the Gorilla Monsoon will send you far into the unknown with comfort, style, and elegance. Do-It-All Dirt Solution A sweet beast designed to handle double track, gravel, bikecamping, and the pursuit of good times, this nimble, do-it-all dirt solution is ready to send cross racers, dirt tourists, and backcountry explorers on the ride of a lifetime. Mounts for Fenders and Racks in Front and Back Conquer wet roads, fully loaded bikepacking trips, and the gnarliest of grocery lists Tire Clearance Built around a 27.5 x 2.4" platform, the Gorilla Monsoon offers clearance for 700c x 42mm tires to deliver complete tire freedom 612 Select Tubing Selected specifically for sporty handling on the course, comfort on tours, and maximum fun on-road or off Dropper Seatpost Ready to rock steep descents on the trail or pavement Flat-mount brakes Flat-mount disc brakes offer clean aesthetics and compatibility with modern product standards

Midnight Special is a road plus bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. Midnight Special shines on pot-holed, deteriorating pavement and the occasional long stretch of gravel. Its 650B road plus tires eat up road chatter and absorb all the bumps in the road like the champion it was designed to be. When it comes to road bikes, we just want to toss a few bananas into our pockets and see where the road takes us. We seek out varied surfaces on our rides and frequently go from pavement to gravel to worse pavement. Midnight Special allows us to accomplish all of that quite comfortably. - Higher volume tires allow better fine tuning of tire pressure on varying surfaces and create a wider contact patch for increased traction - Modern road standards like flat-mount disc brakes, 12mm front and rear thru-axles, and a 44mm head tube - Clearance for 650B x 60mm or 700c x 42mm tires without fenders (650B x 50mm or 700c x 38mm with fenders)

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high-volume, large-diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29 x 3" tires

Straggler is a bikepacking-inspired road/gravel bike mostly at home on pavement but ready for trail duty when called. Born on Gravel. Raised on Pavement Straggler is tuned for cross-over exploration on a wide variety of terrain conditions. It's a day-tripper and a weekender. It's a "rough road" road bike, a cyclocross bike with no pretense about racing, a utilitarian townie, a light-duty touring bike and an all-weather commuter. It's a steel gravel bicycle that thrives on the road. Think of it as a "mountain biker's road bike." If you only have room for one bike in your life, Straggler can (and should) be your one and only. Straggler's capabilities go well beyond asphalt. It also lends itself well to light touring setups. We're talking frame bags, seat bags, and "credit card touring" rather than full-blown touring. Straggler also handles our 8- and 24-Pack Racks well, so you have some heavier-duty loading options. - Accommodations for racks and fenders - Forward-exiting horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Clearance for 650B x 41mm tires with fenders!

The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset, and Surly's Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations. - 100% Surly Chromoly steel frame and fork; double-butted main triangle and 44mm headtube - The tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing. Works with 142, 148 12mm thru, as well as 135mm w/ 10/12 washer - Internal dropper seatpost routing with 30.9mm seat tube ID - Clearance for 29 x 2.55" or 27.5 x 3" tires

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

Breaking the Mold with a 29er Bike As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high volume, large diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. "Lean back, hang on, and ride that wild horse." -Thor - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29" x 3" tires

As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high-volume, large-diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29 x 3" tires

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

Midnight Special is a road plus bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. Midnight Special shines on pot-holed, deteriorating pavement and the occasional long stretch of gravel. Its 650B road plus tires eat up road chatter and absorb all the bumps in the road like the champion it was designed to be. When it comes to road bikes, we just want to toss a few bananas into our pockets and see where the road takes us. We seek out varied surfaces on our rides and frequently go from pavement to gravel to worse pavement. Midnight Special allows us to accomplish all of that quite comfortably. - Higher volume tires allow better fine tuning of tire pressure on varying surfaces and create a wider contact patch for increased traction - Modern road standards like flat-mount disc brakes, 12mm front and rear thru-axles, and a 44mm head tube - Clearance for 650B x 60mm or 700c x 42mm tires without fenders (650B x 50mm or 700c x 38mm with fenders)

Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot, spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

Straggler is a bikepacking-inspired road/gravel bike mostly at home on pavement but ready for trail duty when called. Born on Gravel. Raised on Pavement Straggler is tuned for cross-over exploration on a wide variety of terrain conditions. It's a day-tripper and a weekender. It's a "rough road" road bike, a cyclocross bike with no pretense about racing, a utilitarian townie, a light-duty touring bike and an all-weather commuter. It's a steel gravel bicycle that thrives on the road. Think of it as a "mountain biker's road bike." If you only have room for one bike in your life, Straggler can (and should) be your one and only. Straggler's capabilities go well beyond asphalt. It also lends itself well to light touring setups. We're talking frame bags, seat bags, and "credit card touring" rather than full-blown touring. Straggler also handles our 8- and 24-Pack Racks well, so you have some heavier-duty loading options. - Accommodations for racks and fenders - Forward-exiting horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Clearance for 650B x 41mm tires with fenders!

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single track, double track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hub and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

Karate Monkey is a highly versatile trail bike that plays the part of 29er and 27.5+ equally well. Karate Monkey delivers a resilient, lively ride on all sorts of gnarly terrain. Its frame is a highly-versatile canvas for whatever dirty masterpiece your brain cooks up. According to our computing machine (Thor) it can be set up in approximately 487 different configurations. Originally designed as a 29er (and the frame that helped spark the 29" wheel movement), the latest Karate Monkey is designed to perform just as admirably as a 27.5+ rig as well. This allows you to pick your poison — provided your poison is having a really great time while permanently donning a huge grin, of course. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29" x 2.5" or 27.5" x 3" tires

Steel Commuter and Gravel Bike Preamble is a hard-boiled steel commuter built for comfort, durability, and buffoonery on pavement and gravel. Nothing More is Needed. Nothing Less Will Do. The challenge was thus: Build a serious steel bike and give it only the attributes that matter most. Make it quick and comfortable on pavement, as well as confident and compliant on degraded surfaces. What the Enginerds put forth is Preamble, a pavement and gravel utility worker that proves you don't need to cut corners or clip coupons to make a more affordable steel bike. You just need to keep shit simple. Preamble can run racks and fenders and carry a couple water bottles. Surly was raised on stealing basic cable, after all. Smooth and efficient on asphalt, Preamble's double-butted main triangle provides a resplendent ride feel and withstands abuse from life's inevitable potholes. Make it your own with flat bars, drop bars, a basket, or bags. On the road to steel euphoria, Preamble is the gateway drug. Let facts be submitted to a candid world: - Offered in flat-bar and drop-bar configurations - Easy T-Shirt sizing to fit nearly every rider (XS, S, M, L, XL) - Sloping top tubes on XS and Small frames for improved standover and comfort - To offer the best rider experience for every frame size, XS and S frames get 650b wheelsets while M–XL get 700c - Custom-cast single-position vertical dropout

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single-track, double-track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hubs and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay-mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. Your BMX Bike All Grown Up Lowside is like the grownup version of the bike you rode when you were a kid and still had hopes and dreams and some semblance of ambition. It's just as happy riding singletrack as it is parked outside your favorite drinking establishment. Lowside is a single speed mountain bike. Singlespeeding has been a part of Surly's DNA since day one when we launched the 1x1 Rat Ride. After a lot of Homie Fall Fests and more feats of strength than we can recall, we decided to discontinue it a couple years back. Lowside picks up right where the 1x1 left off. "Some have dubbed the Lowside the ultimate pub cruiser." - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Spec'd in alternating years with 26 x 3" or 27.5 x 2.8" tires, the Lowside remains capable of running either option

The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. "Any day of the week's a great day to ride a Wednesday." - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8" tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6" tires on an 80mm rim Specs: - Rear Dropout Configuration: Horizontal slotted with optional vertical dumpout - Rear Hub Spacing: 12 x 177mm (Surly axle included); 10 x 170mm with Surly 10/12 Adapter Washers (not included) - Front Hub Spacing: 15 x 150mm (Surly axle included) - Rear Brake: Disc - 51mm I.S. (203mm max rotor) - Front Brake: Disc - 51mm I.S. (203mm max rotor) - Head Tube: Ø44mm - Steerer Tube: Ø28.6mm (1-1/8") - Crown Race: Ø30mm (1-1/8") - Stock Headset Upper (S.H.I.S.): ZS44/28.6 - Stock Headset Lower (S.H.I.S.): EC44/30 - Front Derailleur (Clamp): High direct mount top-pull (Ø34.9mm) - Max Chainring (CL): 1x (Fat bike 170): 34T; 2x (Fat bike 170): 26/38T; 2x (Surly OD): 22/36T - Tire Clearance Frame: 26 x 4.3" (rear axle position); 26 x 3.8" (front axle position); 29 x 3.0" - Tire Clearance Fork: 26 x 5.25"; 29 x 3.0" - Rigid Fork Spec: 468 x 47mm - Max Suspension Fork Length: 511 x 51mm (Fatbike 100mm) - Bottle Mounts Frame: 2 Standard (XS - M); 3 Standard (L - XL) - Bottle Mounts Fork: 2 Three-Pack - Rack Mounts Frame: Yes (upper and lower threaded) - Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded) - Fender Mounts Frame: Yes - Other Features: Internal dropper post routing compatible

Midnight Special is a road plus bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. Midnight Special shines on pot-holed, deteriorating pavement and the occasional long stretch of gravel. Its 650B road plus tires eat up road chatter and absorb all the bumps in the road like the champion it was designed to be. When it comes to road bikes, we just want to toss a few bananas into our pockets and see where the road takes us. We seek out varied surfaces on our rides and frequently go from pavement to gravel to worse pavement. Midnight Special allows us to accomplish all of that quite comfortably. - Higher volume tires allow better fine tuning of tire pressure on varying surfaces and create a wider contact patch for increased traction - Modern road standards like flat-mount disc brakes, 12mm front and rear thru-axles, and a 44mm head tube - Clearance for 650B x 60mm or 700c x 42mm tires without fenders (650B x 50mm or 700c x 38mm with fenders)

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

With its sweeping curves, the Pure City Step-Through has the classic look of a cobblestone street with a smooth modern feel. Whether you're headed uptown, downtown, or just around the corner, if you're on this bike, you'll always be taking the scenic route! Speeds to meet your needs We designed these bikes to thrive in whatever city you call home. Because not every city is created equally, we built two different gearing options so you can pick that set-up that’s right for you. The 3-speed gives you a small range of gears to cycle through and the internal hub is unmatched for ease of use and creating a clean, minimalist look. The 8-speed gives you a wider range of gears to tackle tough hills and haul heavier loads. - Internal hub for ease of use, a minimalist look, and low maintenance. - Shift without pedaling, ideal for cities or stop-and-go riding. - Easier to adjust and more reliable than a derailleur.

We think by now, most of you get what Straggler is. It’s a madly versatile bike that can be used for most types of riding and riding surfaces. Better still is that you now have the option of 650b wheel size. 650b wheels were popular for a long time many years ago on ‘Constructeur’ style bicycles and we all know how real stuff was back in the day…650b wheels strike a nice balance between the benefits of both 26” and 700c sizes. The smaller wheel allows smaller riders to fit well on smaller frames, produces a stronger wheel, makes fitting big-ass tires easier and are more agile than their larger counterparts. Straggler has disc caliper mounts instead of rim brake studs. It’ll accept rotors up to 160mm. The rear dropouts are unique, too. They’re a partially closed horizontal design that accommodates singlespeed or geared drivetrains. They feature stop screws that thread in from the rear to further secure the wheel and to position the rear wheel for optimal shifting, plus a forward-mounted stop screw on the drive side to keep the wheel from slipping forward under the force of your gargantuan legs. The rear dropouts are spaced 135mm instead of 132.5mm like the Cross-Check simply because there are far more options for disc hubs in this spacing. Straggler 650b has braze-ons for fenders, racks and bottle cages. The geometry is slightly different, with angles and tube lengths very close but not identical to the Cross-Check, but like the Cross-Check it’s ready to take you just about anywhere. It’s a day tripper and a weekender. It’s a ‘rough road’ road bike. It’s a cyclocross bike with no pretense about racing. It’s a utilitarian townie. It’s a light-duty touring bike. It’s an all-weather commuter. And when you get tired of one set up, you can swap parts around and turn it into something else. We think that’s pretty neat.

The new Ascent is more adaptable than ever. The frame is TIG-welded with heat-treated, triple-butted Ritchey Logic steel tubing that features rack and fender mounts and a multi-purpose mount under the downtube, while a new Ritchey steel fork offers up multi-purpose, rack, fender and dynamo light mounts. Other notable features of the new Ritchey Ascent include post-mount brake compatibility, 148mm spacing and an external seat collar. Throw a mountain bike bar on it and some 27.5" wheels for more trail-oriented adventures. Or ride it with drop bars and 29" wheels for some longer distance rough road riding. However you choose to roll, your riding possibilities are limitless atop the new Ritchey Ascent. - Includes rack and fender mounts, 3 multi-purpose mounts (2 fork, 1 frame) and threaded crown port - Features the new Ritchey steel fork with an 1-1/8" straight steerer - Fits 27.5" or 29" wheels and tires

This is a frameset that can be ridden hard and put away wet. We use Tange tubing because it’s got a heritage of quality and a responsive feel. We know that the everyday cyclist needs a bike they can count on, day in and day out. From there we offered a bike that everyone could get behind: a solid platform for a multitude of fixed and single-speed builds. The beauty of the frame for us is that it keeps the track spirit, yet has never limited itself. The latest update is tweaked to fit fatter tires in case you want to try to track across. It also has an anti-rust coating on the interior of the tubes. If you choose to put brakes on, get the 57mm reach, not 49mm. We no longer have a 61cm size, but we have re-designed our smallest size with a sloping top tube to fit shorter riders. Uber-affordable track frame with full CrMo construction and plain gauge tubes - Responsive semi-track geometry with horizontal 120mm spaced track dropouts - Drilled for the rear brake, 57mm long reach, but no cable guides - Clearance for 32mm tires - Anti-rust coating applied to the interior of the tubes - Removable decals

A true mixte frame with the double top tube/stays. Obviously offers lots of standover height and style as well. You'll find the geometry is more sporty than upright-comfy. Though it can be built up to suit either demeanor. Drop bars? Sure. Townie bars? Of course. This version is updated for disc brakes. This not only improves wet weather braking but allows it to fit wider, more sure-footed tires. - Provides a great foundation for a premium townie or commuter with sport touring geometry - 650b conversions are possible and encouraged - Tange Prestige heat-treated butted CrMo steel - Tange sliding dropouts allow for geared or single-speed drivetrains - Rear hub spacing: 135mm QR with International Standard disc brake mounts - Clearance for 700x38c tires with fenders - Includes color-matched lugged fork - 5.0lbs (54cm)

Tom Ritchey rides about 10,000 miles (16,000 km) per year, and most of that is off-road. Combine that with his more than 50 years of designing and building bicycles, and it’s no wonder the Outback has become an icon in the gritty world of gravel and adventure bikes. Wrapped in tasty Guac y Crema paint, or the new Granite & Snow colorway, the Outback sports several practical and adaptable features that offer riders the ability to chase epic ride experiences beyond the end of the road and the end of the day. Rack and fender mounts help to keep things dry and expand the load-carrying capacity for longer bikepacking adventures, while clearance for 700c x 48mm or 650b x 2.0in tires opens up a whole new world of possibilities. Doubling down on the Outback’s practical performance, an all-carbon fiber Ritchey Adventure Fork with multi-purpose mounts on the legs gives you more places to stow the supplies you gather at the last café. The Outback is painstakingly TIG-welded with proprietary triple-butted Ritchey Logic steel tubing that now sports an updated one-piece truss design for flat mount brakes* - providing as much stiffness and strength of previous mounts while significantly reducing chainstay weight. Bikepacking, road, off-road, trail, expedition, you name it…the Ritchey Outback is designed do it all. - Includes Ritchey Adventure Fork with multipurpose mounts - Accepts 700c x 48mm or 650b x 2.0in tires - Features rack and fender mounts - Heat-treated, triple-butted Ritchey Logic II tubing - Includes Ritchey WCS Carbon Adventure 12x100mm thru-axle fork - Forged and machined straight head tube - Full length housing stops for use with cable or hydraulic brakes - Front and rear flat mount disc brake interface - 12x142mm rear thru-axle

The version 2.0 of the Riff offers practical updates in features and geometry without going all-in with progressive geometry that almost everyone in chasing. We wanted to keep this frame a hardtail that's great for bike packing and familiar-feeling on long days in the saddle on rolling terrain. There is a slightly steeper seat angle for more efficient climbing and shorter seat tubes to benefit dropper posts. Tough Broski Sliding Dropouts allow you to run single-speed, geared or even hub gears. Rear hub spacing in updated to Boost 148 . A modified chainstay allows fitting even some double cranks with “plus size” 2.8? wide. - ED coating inside frame and under the paint increase rust resistance - Boost 148mm rear hub spacing - Geometry is optimized for 120mm forks. Will work well with a 100mm fork, too. - Tange Prestige heat-treated butted CrMo steel; butted CrMo rear end - ISO disc brake tabs - IRD Broski Sliding Dropouts - S-bend seat stays and chainstays - Rear rack and fender eyelets - Dropper post cable routing runs on downtube and inside the seat tube - 34.9mm seat collar(not included), 400mm post recommended - CNC-machined 44mm headtube: Will fit 1-1/8" steerers with a ZeroStack 44 headset or fit tapered steerers with a ZS44 upper assembly and external cup (EC44) lower assembly - Recommended tire size: 27.5 x 1.95" ‚Äi 2.8" - Only the Large size frame comes with bottle mounts on the seat tube - 5.7 lbs (XS)

The original inspiration for the Wolverine was “monster cross”, but it is seriously so much more. Its geometry is stable enough for off road touring, but sporty enough for all-around adventure. 2023 brings us the 4.1 A-Type update which adopts the flat mount disc standard on the frame and optional CrMo fork. The A-Type has more modern standards than the B-Type, such as 142mm rear thru-axle and a 44mm headtube that will fit 1-1/8 straight steerer or tapered steerer forks with the proper headset type. There is NO frame break for Belt-Drive on the A-Type Wolverine. (See chart in photo gallery for other differences between A and B) - IRD Broski sliding dropouts let you run gears or a single speed set up with better durability and less wheel slippage - Tange Prestige heat-treated CrMo tubes for the front triangle, butted CrMo rear end - Internal anti-rust coating protects against rust - Braze-ons for rear rack and fenders (disc brake-compatible racks only) - Rear hub spacing: 12x142mm TA with flat mount disc brake - Clearance for 700x45c tires with fenders - Three sets of water bottle bosses - 44mm ID headtube: (Use ZS44/28.6-ZS44/30 headset for 1-1/8" steerers) (Use ZS44/28.6 -EC44/40 headsets for 1-1/8"-1-1/2" tapered steerers) - Matching thru-axle fork sold separately—SF3426

Steeped with more than 50 years of frame-building heritage, innovation, exploration, and lots of riding, the classic lines of this beautiful steel frame and carbon fiber fork unite with modern building techniques and proven materials to deliver a contemporary bicycle that’s wonderfully comfortable for long days in the saddle, nimble and stiff enough to win the sprint for that sign, and adequately adaptable to endure roads that might lack proper pavement. The Road Logic Disc frame is built with a heat-treated and triple-butted Ritchey Logic tubeset designed specifically for the Road Logic. It features aggressively short-butted sections optimized for TIG welding that save weight and improve ride quality. The frameset also includes a Ritchey WCS Carbon Road Fork for precise handling and responsiveness. Updated for 2024, this modern classic now sports compatibility with Shimano’s newest Di2 semi-wireless groupsets. A new drive side dropout design allows for concealed wire routing from the battery in the seat tube, through the bottom bracket area into the chainstay where it makes a stealthy exit to the rear derailleur. But mechanical shifting fans, rejoice - the Road Logic Disc frame retains cable stops for mechanical groupsets. On the non-drive side chainstay sits a new one-piece truss design for flat mount brakes - providing as much stiffness and strength of previous mounts while reducing chainstay weight significantly. With purpose-driven design, unyielding attention to detail, and modern features, the new Road Logic Disc almost telepathically delivers an amazing ride experience unlike any other bike. It’s fast, nimble, comfortable, and perfectly suited for wherever your rides take you. - Heat-treated, triple-butted Ritchey Logic tube set features short-butted sections optimized to save weight and improve ride quality - Now compatibility with Shimano newest Di2 semi-wireless groupsets - Painted to match Ritchey full carbon fork - Forged and machined straight head tube - Standard road spacing on frame and fork - Fits tires up to 30c - Ritchey WCS Carbon Road Fork included - 12x142 thru axle (included with frame) - Logic Zero WCS drop in 1-1/8" headset included

The Jawbone B-Type frame is a versatile platform to build drop bar mountain touring and bike packing rig. While it is still game for riding your favorite trail loop it it is its element when loaded up. The B-Type version is for rider who may still prefer the familiarity of 100/135mm QR hubs, but appreciates extra features like sliding dropouts and a tons of mounting bosses. - Tange Prestige heat-treated butted CrMo steel; butted CrMo rear end - IRD Broski Sliding Dropouts allows for running derailleurs as well as geared hubs like Rohloff (Stock dropout insert is for 135mm QR. 142 x 12mm Thru-Axle inserts available separately, SF4958, SF4959. SF4960-142x12mm axle ) - IS mount disc brake tabs - Front derailleur compatible (bottom pull) - Headset for optional 1-1/8" matching fork: SHIS: ZS44/28.6 | ZS44/30. If running a tapered steerer fork, get an EC44 lower cup - Rear rack and fender eyelets - Two sets of bottle cage bosses; one set of cargo cage bosses on downtube - 44mm headtube: Fits 1-1/8" steerer tubes and tapered steerer tubes with a headset swap - 27.2mm post size/28.6mm frt. der. size/29.8mm seat collar, 73mm bottom bracket (English threads) - Tire Width Range: 27.5 x 47mm to 2.6" / 700c x 38mm to 29 x 2.25" - For matching fork please considerSF4030

Midnight Special is a road plus bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. Midnight Special shines on pot-holed, deteriorating pavement and the occasional long stretch of gravel. Its 650B road plus tires eat up road chatter and absorb all the bumps in the road like the champion it was designed to be. When it comes to road bikes, we just want to toss a few bananas into our pockets and see where the road takes us. We seek out varied surfaces on our rides and frequently go from pavement to gravel to worse pavement. Midnight Special allows us to accomplish all of that quite comfortably. - Higher volume tires allow better fine tuning of tire pressure on varying surfaces and create a wider contact patch for increased traction - Modern road standards like flat-mount disc brakes, 12mm front and rear thru-axles, and a 44mm head tube - Clearance for 650B x 60mm or 700c x 42mm tires without fenders (650B x 50mm or 700c x 38mm with fenders)

The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset, and Surly's Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations. - 100% Surly Chromoly steel frame and fork; double-butted main triangle and 44mm headtube - The tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing. Works with 142, 148 12mm thru, as well as 135mm w/ 10/12 washer - Internal dropper seatpost routing with 30.9mm seat tube ID - Clearance for 29 x 2.55" or 27.5 x 3" tires

Tested on the track and designed in conjunction with a team with BMX race knowledge spanning 3 decades, Radio Raceline Helium frames are well thought out and powerful pure bred race machines. You'll find no gimmicks, no "goofy" tubing shapes or unnecessary features. These frames have been built from the ground up with race proven geometry and technology combined with clean, functional aesthetics designed to give you the holeshot out of the gate. Radio Raceline Helium frames are designed to feel comfortable, stiff and fast, exactly how a race bike should.

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single-track, double-track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hubs and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay-mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).